home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1996 September
/
CHIP 1996 szeptember (CD07).zip
/
CHIP_CD07.ISO
/
drivers
/
asus
/
cmd646
/
cmd646.arj
/
NETWARE.4X
/
README.NW4
< prev
Wrap
Text File
|
1995-09-08
|
1KB
|
39 lines
CMD PCI64x 32-Bit Local Bus master IDE Netware 4.x Driver Installation Instructions
-----------------------------------------------------------------------------------
The CMD C646X4X hard disk driver can be run on Netware 4.X. It supports up
to 2 IDE channels.
Note that the CMD 32-Bit Local-Bus IDE driver for DOS has to be loaded in
CONFIG.SYS in order for the C646X4X Netware driver to function properly.
The C646X4X driver will inherit the drive mode and timing setting from DOS
driver. There is no option to specify for this driver. It will automatically
look for all the drives on the IDE channel(s).
INSTALLATION
------------
1) Install Netware 4.X
2) When installation of Netware 4.X prompts for hard disk driver name, specify
the full path name of the CMD Netware driver. For example, if the CMD
installation diskette is in drive A, you can specify
A:\NETWARE.4X
3) Select C646X4X
4) Proceed with the rest of the Netware installation.
5) Go back to DOS
6) Run the INSTALL.BAT from the NETWARE.4X directory in the CMD installation
diskette. For instance, if the diskette is in drive A,
A:
CD \NETWARE.4X
INSTALL A: